Gembird PETG - Wit - 1 kg spool 1,75mm

€ 26,95

Polyethylene terephthalate (PETG) is an amorphous thermoplastic of the polyester family
Perfect combination of clarity and strength. The clarity of PETG approaches that of Acrylic and impact resistance is close to Polycarbonate
Easy to print with a variety of 3D printers


Very high strength filament
Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.
Chemical Resistant - offers superior chemical resistance when compared with many other transparent plastics.
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform


Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 240°C: 1.27 g/cm3
Melt Flow Index at g/10min, 200°C/ 5kg: 20
Melt Point: 220 - 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 5mm/min: 50 MPa
Impact Strength: 8.7 KJ/m2
Ensile Break: 120 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole